Dry drum magnetic separator, the farther away from the cylinder surface

Dry drum magnetic separator, the farther away from the cylinder surface, super powerful magnet decay, streams too thick will cause the magnetic particles and non-magnetic particles are mixed with each other, affecting the separation efficiency of ore, if realized particles on the belt single layer distribution is ideal. Requires dry pre-election increase in the material layer flat feeder, make full use of the effective width of the belt, and the dry material selection thin and evenly to ensure dry separation effect. Efficient magnetic parting device makes use of strong magnetic forces Drum Separator sorting weak magnetic minerals become a reality.

Dry drum magnetic separator is the successful development

Dry drum magnetic separator is the successful development of our new high-efficiency magnetic parting device. Magnetic system all use high quality ferrite materials and rare earth NdFeB materials produced through wonderful open magnetic circuit plan, the maximum magnetic induction tube table sorting area to reach 0.8T above, magnetic field strength is customary machine 3 -5 times the magnetic force of the magnetic sub-constituency can reach the level of electro magnetic super powerful magnet separator. Sorting cylinder mining durable stainless steel refining; separation of mineral oscillated feeder evenly to the upper part of the sorting drum rotating cylinder barrel stripped the non-magnetic materials, magnetic materials have been strong magnetic forces suction effect to the cylinder, it is convenient to use sub-ore plate, precisely the magnetic and non-magnetic materials respectively.

Dry magnetic separator Scope

Dry magnetic separator Scope:
1, coarse disseminated form of hematite, limonite, mirror, iron ore, manganese ore and all weak magnetic minerals selected purification.
2, non-metallic minerals (andalusite, sillimanite, kyanite, garnet, feldspar, quartz, rutile, zircon, corundum, diamond, etc.) in addition to iron raw materials and products, in addition to titanium, cleaning and other refined processing.
3, the magnetic separation equipment main purposes: the election of anhydrous iron work area; refractory materials and other materials in addition to iron work.
Dry magnetic separator features: the disposal of a large amount of equipment, sorting mineral grain wide-scale, high precision parting, not obstruction; structure is simple, convenient protection, power consumption is only 20% of electromagnetic strong magnetic separator.

Dry drum magnetic separator is suitable for

Dry drum magnetic separator is suitable for sand mining, iron ore and other iron-poor roughing fewer raw materials. Is sand, sand and other essential machinery containing a small amount of raw iron election dry iron.
Dry magnetic separator magnetic system, using high-quality ferrite material or rare earth magnets composite made of tube sheet average magnetic induction intensity of 1000 ~ 6000GS. The separator has a simple structure, large capacity, easy to operate, easy to maintain. Dry magnetic separator is ideal for arid regions, dryland magnetite mining and utilization has opened up a new way.

Dry magnetic separator works

Dry magnetic separator works:
After the material through electromagnetic vibrating feeder evenly to the sorting area, drag the bottom of the belt into the sorting uniform magnetic roller, due to the non-magnetic material particles from the magnetic force, the centrifugal force and gravity, non-automatic fall magnetic products connected trough. The magnetic particles is due to strong magnetic attraction, adhered to the separation of the magnetic roller belt surface, after the sorting belt to fall away from the magnetic roll separators products connected trough area in order to achieve the magnetic and non-magnetic materials separation.

Dry drum magnetic separator maintenance

Dry drum magnetic separator maintenance:
1. Wet drum separator should be full-time staff to check and installation.
2. equipment installed in the concrete foundation level, and with the anchor bolts.
3. The installation should pay attention to the main body vertical and horizontal.
4. Press the power configuration of the device power cord and control switches.
5. Check is completed, the empty load test, test the normal production.

Magnetic separator block after installation is complete mineral sorting test

For most ores, the degree of separation marks ore monomer that is the size of the magnetic particles and gangue mineral particle separation of coarse or fine ore particle size.
If the ore to a small particle size, indicating a high degree of mineral monomer separation, can be satisfied with the sorting index; if given the relatively coarse ore particle size, mineral did not fully explain dissociation, monomer separation is not high, opposite the living body more That magnetism

Particles and gangue is still considerable parts together. Because of the living body also has a considerable magnetic sorting can choose up to a considerable part of that lower grade ore. Therefore, the requirements for the mineral magnetic separator for silica sand must be sufficiently achieved monomer separation.

For coarse-grained disseminated ore and gangue minerals as long as reached monomer separation on the line, not necessarily the size too small. Such ore sometimes coarse granularity although some, but not low quality sorting, the main reason is due to ore dissemination size
Coarse grinding to a certain extent useful minerals and gangue separated.

搜索

复制