Friday, December 4, 2015

Works of dry magnetic separator



Intertekdry magnetic separators of ore will be 0.5 to 5 mm into the hopper, vibration motor vibration through the fabric, the quantity can be precisely adjusted by hand wheel, dragging the magnetic roller by motor speed, speed through speed Speed ​​table to be adjusted to control the production and concentrate grade magnetic separator. Mineral particles are fed by the conveyor belt on the magnetic roller separation, due to the manganese ore particles magnetic, immediately attracted strong magnetic field on the magnetic roller, and gangue grain because there is no magnetic, magnetic magnetic roller it does not generate suction With the rotation of the magnetic roller, mineral particles have been attracted to the magnetic roller, while the gangue grains in the magnetic roller to the front position was thrown out in front of the separator plate of ore, mineral particles continue to be taken off the magnetic roller When the magnetic zone automatic fall into a bucket to collect the anthology ore concentrate products. Since the fall of the magnetic roller entrained gangue also some weaker magnetic mineral particles, they will proceed to the next magnetic roller magnetic separation, magnetic separation after finished mineral particles into the second anthology ore bucket collection for the finished product, was thrown out of the gangue by tailings discharge port, to this end magnetic separator step. Since the ore gangue abandoned, so make manganese ore grade improved.

No comments:

Post a Comment